Nortel Meridian Meridian 1 Maintenance Manual page 166
Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide
Hide thumbs
Also See for Meridian Meridian 1:
- Feature description and administration (1816 pages) ,
- Scripting manual (812 pages) ,
- Upgrade manual (286 pages)
Table of Contents
Advertisement
154 Chapter 3: Link maintenance commands
Figure 11
Link maintenance help command (continued)
Examples:
mlusr> status link 1
mlusr> set monitor 2 all mlusr> enable monitor 2
mlusr> display link 1
mlusr> trace link 1
mlusr> get traffic 1
mlusr> disable traffic 1
mlusr> loopback test
Last change:
2/19/93
553-3211-510 Standard 1.0 October 1998
mlusr> g a (get associations)
mlusr> change link 1
mlusr> disable link 1
mlusr> enable traffic 1 5 terminal lpr file 1
mlusr> enable traffic 1
mlusr> continuity test
help command By entering part of a command (usually a key word in the
command format), detailed help is displayed if it is available.
help msgtypes Provides a summary list of all Meridian Link messages
(message type and message name) that are passed across the link between
the Application Module or IPE Module and the host.
help messages Provides a summary of Meridian Link message names used
up to Meridian Link Release 5C.
Help information is usually too long to display on the screen at one time, so
you are prompted to press [Return] key to continue viewing help.
- Quick Links:
- Logging in
Hide quick links:
Advertisement
Table of Contents
