Example (continued):
Current Entry > 1
Type :
"delete" to remove
"<ret>" to keep as is,
"<link number> <link type> <file name>" to change
Entry > 1
LAN
Current Entry > 2
Type :
"delete" to remove
"<ret>" to keep as is,
"<link number> <link type> <file name>" to change
Entry > <cr>
New Entry
Type :
"<ret>" end changes
"<link number> <link type> <file name>" add entry
Entry > <cr>
New Control File Image:
0
HDLC
1
LAN
2
ASYNC
Confirm? (yes or no): y
Note: ÒHDLCÓ, ÒX25Ó, ÒLANÓ, and ÒASYNCÓ must be entered in uppercase;
if they are entered in lowercase, no error will be given but files will not be
addressed correctly by the software. The pathname of the file must be in
lowercase. The number of spaces between each parameter does not
matter.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 99
X25
/usr/mlusr/conf/x25hlnk.datafile
/usr/mlusr/conf/lanhlnk.datafile
ASYNC
/usr/mlusr/conf/vlink.datafile
/usr/mlusr/conf/hdlcmlnk.datafile
/usr/mlusr/conf/lanhlnk.datafile
/usr/mlusr/conf/vlink.datafile