Nortel Meridian Meridian 1 Maintenance Manual page 264

252 Chapter 5: Application Module and IPE Module error messages
Table 7
maint messages that appear on the console (continued)
Command Message
fileverif Permissions and ownership tests
(continued) found failures listed above.
/usr/maint/file/AutoStart file has
incorrect value 'value'
/usr/maint/files/IncrDY file has
incorrect value 'value'
/usr/maint/files/Port file has
incorrect value 'value'
/usr/maint/files/Speed has
incorrect value 'value'
Structural verification found
failures as listed above
help Ôinvalid commandÕ is not a valid
command
langconfig Secondary language cannot be
the same as the default language.
Incorrect input -- enter an integer.
553-3211-510 Standard 1.0 October 1998
Description
The permissions and ownership
tests found at least one file that
failed. The application software may
not have been installed
successfully.
The specified file contained the
wrong value.
This message appears even if no
errors are found. If at least one error
is listed, the structural verification
tests found at least one failure. The
application software may not have
been installed successfully.
The command for which help was
requested was not a valid
command. Check the spelling of the
command and try entering it again.
Make sure CAPS LOCK is not set.
Select the secondary language
again, making sure that it is different
from the default one.
Enter the number corresponding to
one of the primary language options
(that is, 1 or 2).
Ñ continued Ñ