Link Testing Commands; Continuity Test - Nortel Meridian Meridian 1 Maintenance Manual

Link testing commands

continuity test

Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Two commands test the physical continuity of links: continuity test and
loopback test.
This command allows you to test end to endÑfrom the Application
Module or IPE Module software to the Meridian 1, including all
applications in the module and host computer.
Command format:
mlusr> continuity test
Example:
mlusr> continuity test
Continuity test in progress
Results will be printed within 15 seconds
Meridian 1/SL-1 SL16: Link 0 responding
mlusr>
Chapter 3: Link maintenance commands 145