Get Resource - Nortel Meridian Meridian 1 Maintenance Manual

122 Chapter 3: Link maintenance commands

get resource

553-3211-510 Standard 1.0 October 1998
For some Meridian Link features, the application must acquire a resource
from Meridian 1 in order to perform a certain function. For example, an
application must acquire a Control DN (CDN) before it can route the call
on behalf of that CDN. Resources include CDNs, ACD queues, ACD
positions, and devices (such as telephone sets or trunks).
The get resource command displays all the resources acquired by an
application for the specified association. Acquired resources may be
expressed in any of the following ways:
¥ all resources
¥ a single or all CDNs
¥ a single or all queues
¥ a single or all ACD positions
¥ a single or all DN devices
¥ a single or all TNs
¥ a voice port
Only one association may acquire a particular resource. Acquiring all
resources precludes all other associations from acquiring any resources that
are configured under the same customer number on Meridian 1.
Command format:
mlusr> get resource association_id
Example:
To obtain the list of resources acquired by an application for
association_id 2:
mlusr> get resource 2
Acquired Resource List Association 2
Single Voice Port 3
Single Voice Port 4
mlusr>