Viewlog - Nortel Meridian Meridian 1 Maintenance Manual

Viewing a file
The following commands are available to you while you are viewing a file:
or u
or d
Prev or U
Next or D
f
n
x

viewlog

This command displays the contents of the current SysLog file. This
command is identical to the viewlog command in maint.
Command format:
mlusr> viewlog
The commands described in the ÒViewing a fileÓ section are available to
you while you are viewing the SysLog file.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 151
scroll up through the file, one line at a time
scroll down through the file, one line at a time
scroll up through the file, a screen at a time
scroll down through the file, a screen at a time
find a particular text pattern
When you type f, you are prompted to enter the
string to locate. Type in the information and press
[Return]. If that pattern exists in the log file, a
portion of the log file containing that pattern will
appear at the top line of the screen.
Note: The f command is case-sensitive. If the
system doesnÕt find the pattern you are looking for,
ensure that you entered it correctly (with the
proper mix of upper and lowercase characters).
find the next occurrence of the same text pattern
exit (return to the Òmaint>Ó prompt)