Nortel Meridian Meridian 1 Maintenance Manual page 165

Figure 11
Link maintenance help command
Meridian Link Administration Command Summary
note: | denotes or, [...] denotes optional, {...} denotes choice
Link configuration and control commands:
get links #shows configured links
display|change linkctl #manage link control file
read|save linkctl [file_name] #read/save from/to a different file
display|change link link_number #show/change link parameters
enable|disable|status|statistics link link_number #link operations
read|save link link_number [file_name] #read/save link parameters
Association commands:
get associations #show current associations
get dn assoc_id #show DNs registered by an association
get resource assoc_id #show resources acquired by an association
get {filter|monitor|record} assoc_id #show status
set|clear {filter|monitor|record} assoc_id {msg_name|msg_type}
enable|disable {filter|monitor|record|msgstat} assoc_id
get msgstat assoc_id {msg_name|msg_type} #show message stats status
clear msgstat assoc_id #clear message stats
enable|disable|display load assoc_id #manage traffic monitor
enable traffic assoc_id {period} {file_name} {lpr} {terminal}
disable traffic assoc_id
Test commands:
continuity test # show diagnostic tests results
loopback test # show diagnostic loopback results
Trace commands:
trace link link_number [trace_level] [file_name] #trace link traffic
trace main trace_level [file_name] #trace through traffic
untrace link link_number or untrace main #set trace off
Commands for more help/information:
help, ?, help messages, help command #list this and other help pages
version, ver #show MeridianLink release running
view #display system log, trace or record files
viewlog #display system log
Quitting or exiting mlusr session:
quit, exit #quit this login and return to maint/login:
link_number = 0 (internal link) or 1 (host link) or 2 (Meridian Mail link)
assoc_id = 1, 2, 3 etc. (use get associations to determine)
trace_level = 0 (full) 1 (partial - no polls)
file_name = Unix file name
terminal = Key word for outputting report to terminal
lpr = Key word for outputting report to printer
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 153