96 Chapter 3: Link maintenance commands
Link configuration commands
display linkctl
553-3211-510 Standard 1.0 October 1998
The link control file (linkctl) contains information on all links to the
Application Module or IPE Module, specifically the link number, link type
(protocol used), and the file name where the link configuration parameters
are stored. Each entry (one line of the file) corresponds to a link.
The link configuration commands do the following:
¥
display or change the link control file
¥
read or save the link control file
¥
display or change link configuration parameters
¥
save link configuration parameters
¥
read link configuration parameters
This command displays the contents of the link control file.
Command format:
mlusr> display linkctl
Example (CCR):
mlusr> display linkctl
Current Control File Image
0
HDLC
mlusr>
Example (Meridian Link):
mlusr> display linkctl
Current Control File Image
0
HDLC
1
X25
2
ASYNC
mlusr>
/usr/mlusr/conf/hdlcmlnk.datafile
/usr/mlusr/conf/hdlcmlnk.datafile
/usr/mlusr/conf/X25hlnk.datafile
/usr/mlusr/conf/vlink.datafile