Chapter 5: Application Module and
IPE Module error messages
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
This chapter describes system messages, UNIX messages, and user
messages. There are two categories of messages, those that are displayed
on the system console and those that are reported to the SysLog file. Note
that if the SysLog process is not running (for example, during shutdown
after the process has been stopped), messages that normally go to the
SysLog file will be displayed on the system console. If you observe a
message that is not described in this guide, contact your Nortel support
personnel for assistance.
The following messages are described in this chapter:
¥
messages that appear on the system console
Ñ system and UNIX messages
Ñ application messages
Ñ maint messages
Ñ mlusr messages
Ñ other messages (display, SysLog, and sys_wdog)
¥
messages that appear in the SysLog file
Ñ application messages
Ñ maint messages
Ñ other messages (SysLog and sys_wdog)
237