106 Chapter 3: Link maintenance commands
553-3211-510 Standard 1.0 October 1998
Example (continued)::
Remote address
Options [1 3]
Current 3
> <cr>
T1
Range [0 9999]
Current
30
> <cr>
Maximum out frames (K)
Range [1 7]
Current 7
> <cr>
Maximum trans attempts (N2)
Range [1 9999]
Current
7
> <cr>
Confirm (yes or no): yes
mlusr>
Note: If you enter yes, the memory image is updated but not the file.
To update the file, see the save link command.
The following parameters cannot be changed:
¥
Protocol
¥
Link type
¥
Port type
¥
Maximum Frame length (X.25)
¥
Lowest LCN for DTE/DCE (X.25)
¥
Lowest LCN (X.25)
¥
LOC LIC (X.25)
¥
Highest LCN for DTE/DCE (X.25)
¥
Highest LCN (X.25)
¥
HOC HIC (X.25)