Nortel Meridian Meridian 1 Maintenance Manual page 295

Table 13
maint messages that appear in the SysLog file (continued)
Command Message
fileverif File 'filename' is present but not
(continued) the correct size
Static file verification found failures
listed above.
Permissions and ownership failed
because PList files are missing
'filename' has wrong owner:
expected 'owner', found 'owner'
'filename' has wrong group:
expected 'group', found 'group'
'filename' has wrong permissions:
expected 'permlist', found 'permlist'
Permissions and ownership tests
found failures listed above.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 5: Application Module and IPE Module error messages 283
Ñ continued Ñ
Description
A file with the specified name is
previously sent, but it is not the
correct file. Either the specified file
has become corrupted or an
updated file was deliberately
placed in the system to correct a
problem. Consult your Nortel
support personnel for assistance
with this condition.
This message appears even if no
errors are found. If at least one
error is listed, the static file tests
found at least one file that failed.
The application software may not
have been installed successfully.
PList files are missing. The
application software may not have
been installed successfully.
The specified file had the wrong
owner, group, or permissions.
The permissions and ownership
tests found at least one file that
failed. The application software
may not have been installed
successfully.