Other Messages Reported In The Syslog File - Nortel Meridian Meridian 1 Maintenance Manual

Other messages reported in the SysLog file

Table 14
SysLog messages that appear in the SysLog file
Message
Due to file size limit, errors
occurring since 'time' have been
removed.
System Log was created
SysLog was truncated at 'time'
System Log is being appended to
System Log was closed by
syslog
System Log was closed by
SIGTERM
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 5: Application Module and IPE Module error messages 287
can be one of the following:
<state>
0Ñinitial state of the link when applstart is invoked
1Ñlink is initializing
2Ñlink has initialized and is waiting for configuration instructions
3Ñlink is configured but disabled
4Ñlink is temporarily down due to configuration of other link
5Ñlink is enabled but is not established
6Ñlink is established
The messages in this section may appear in your SysLog file. These error,
warning, or status messages appear as a result of lower-level software
processes.
display
No messages are reported by the display process in the SysLog file.
SysLog
The following messages appear as a result of processes related to the
SysLog file.
Description
WarningÑall entries in the SysLog file since ÔtimeÕ
have been lost. The system should operate normally
and user intervention is not required.
StatusÑindicates when the SysLog file was created.
StatusÑindicates when the SysLog file was truncated.
StatusÑthe SysLog file is being appended.
StatusÑthe SysLog file was closed by SysLog.
StatusÑthe SysLog file was closed by an external kill.