Nortel Meridian Meridian 1 Maintenance Manual page 50

38 Chapter 2: Application Module commands
553-3211-510 Standard 1.0 October 1998
Configuring a traffic report
Configure a traffic report by selecting option 1 from the CCR Traffic and
Statistics Reporting Utility menu to display a list of traffic report
configuration options.
Example:
Configure Traffic Report Options
1. Include/Exclude Script Statistics
2. Change Interval Between Reports
3. Change Period of Record Keeping
Enter the function that you wish to perform.
(Hit the <RETURN> to EXIT)
When you select an option, its current value appears, and you are prompted
for a new value. The options available are as follows:
¥ Include/Exclude Script Statistics includes or excludes information
about the calls that have used a script and how those calls were
handled by the script.
¥ Change Interval Between Reports sets the time interval (in minutes)
between reports. The time interval may range from 0 to 1440 minutes
(60 minutes is the default), although intervals of less than five minutes
are not recommended.
¥ Change Period of Record Keeping sets the length of time (in days)
that reports will be kept (maximum of 14 days). A zero setting
indicates that no historical reports are kept.
Any changes that you configure take effect the next time you enable traffic
or the next time the traffic reporting process is restarted for some reason
(for example, because of a system reboot).