Nortel Meridian Meridian 1 Maintenance Manual page 448

436 Chapter 8: Recovery/replacement procedures
553-3211-510 Standard 1.0 October 1998
Procedure 21: Reboot and go through setup (continued)
7 At the Ò#Ó prompt, type setup and press [Return].
The setup procedure begins.
Figure 105
Time zone prompt
The first step is to set the timezone, date, and time of the system clock.
Current time and time zone is:
Change the time zone? [y, n, ?, q]
8 You are prompted to change the time zone. Type in your response
(y if you wish to change the time zone, n if the time zone is already
correct) and press [Return].
If you typed n, go on to step 11 where youÕre prompted to change
the date and time. If you typed y, the time zone selection list
appears.
Figure 106
Time zone menu
Available time zones are...
1. Greenwich
2. Atlantic
3. Eastern
4. Central
5. Mountain
6. Pacific
7. Yukon
8. Alaska
9. Bering
10. Hawaii
11. Middle European (MET)
12. East European
13. Set TZ variable for any other time zone info
Enter zone number:
12:37 EDT
(GMT)
(AST & ADT)
(EST & EDT)
(CST & CDT)
(MST & MDT)
(PST & PDT)
(YST & YDT)
(AST & ADT)
(BST & BDT)
(HST)
(EET)