102 Chapter 3: Link maintenance commands
display link
553-3211-510 Standard 1.0 October 1998
This command displays the contents (parameter settings) of a link
configuration file. Table 4 (following the description of the change link
command) describes the parameters in more detail.
Command format:
mlusr> display link link_number
Example: Link 0 (LAPB) configuration
mlusr> display link 0
Protocol: HDLC
Machine ID: SL16
Delay: 0
Port type: H
PDN type: 0
Baud rate: 19200
RFS timer: 150
Remote address: 3
Maximum out frames (K): 7
mlusr>
Example: Link 1 (TCP/IP) configuration (Meridian Link)
mlusr> display link 1
Protocol: LAN
Machine ID: Lanlink
Delay: 0
Port: 3000
Link type: 1
Physical DTE(0)/DCE(1): 0
Maximum Frame length: 135
Fail timer: 50
Internal address: 1
T1: 20
Maximum trans attempts: (N2): 8
Link type: 2