Nortel Meridian Meridian 1 Maintenance Manual page 258

246 Chapter 5: Application Module and IPE Module error messages
Table 7
maint messages that appear on the console (continued)
Command Message
backfiles No files selected
No files available for selection
selectool: input file not found
selectool: out of memory
selectool: unknown error
<NUMBER>: exiting
bootconfig (no error messages)
ccrexit (no error messages)
ccrmidnight Unable to notify REPORTER
(CCRLOG/MMGR) of midnight
553-3211-510 Standard 1.0 October 1998
Description
No file was selected.
No files are available for backup.
The command which invoked the
selector is programmed incorrectly.
Report the failure to your Nortel
support personnel.
The selector cannot obtain enough
memory to function. Report the failure
to your Nortel support personnel.
A programmer error within the
selector causes an unknown error.
Report the failure to your Nortel
support personnel.
Note: <NUMBER> in the message
is replaced with the actual error
number generated.
The ccrmidnight routine could not
notify the traffic reporting process,
the error log process, or the
resource manager process of the
occurrence of a midnight. Use the
viewlog command to search for any
applicable traffic reporting errors in
the SysLog file.
Ñ continued Ñ