Nortel Meridian Meridian 1 Maintenance Manual page 452

440 Chapter 8: Recovery/replacement procedures
553-3211-510 Standard 1.0 October 1998
Procedure 21: Reboot and go through setup (continued)
Figure 118
Administrative passwords prompt
Do you want to give passwords to administrative logins? [y, n, ?, q]
19 You are prompted to give passwords to administrative logins. Type
q and press [Return].
Figure 119
Change system name prompt
This machine is currently called "sysV68".
Do you want to change it? [y, n, ?, q]
20 You are prompted to change the name of the system. For security
reasons, you should change the system name from the default,
sysV68. Type y and press [Return].
Figure 120
System name prompt
What name do you want to give it? [q]
21 You are prompted for the new system name. Type the new name
and press [Return]. Figure 121 appears.
Figure 121
Setup end message
This completes your initial setup of the machine. You may now log into your
login.
#
22 To install the application software, go to Procedure 22.
23 If you need to go to the ÒConsole Login:Ó prompt (for example, if you
are not installing Meridian Link or CCR immediately), type exit and
press [Return].