Chapter 5 Install And Configure The High Availability Pair; New System Installation Procedure - Nortel CallPilot Install Manual

Chapter 5
Install and configure the High
Availability pair
In this chapter
"New system installation procedure" (page 37)
"Prepare the switch and install the 1005r servers" (page 40)
"Prepare both 1005r servers" (page 41)
"Configure CP1 and CP2 using the CallPilot Configuration Wizard" (page 48)
"Connect and verify LAN connections" (page 68)
"Run Stage 1 of the High Availability Configuration Wizard to check CP1
and CP2 configuration " (page 75)
"Install the AutoStart Agent and Console software " (page 79)
"Configure the AutoStart software" (page 109)
"Bring the Resource Groups online" (page 122)
"Test your configuration" (page 127)
"Create the CallPilot Reporter connections" (page 128)
"Add the servers to a Windows domain" (page 130)

New system installation procedure

This chapter describes how to perform a fresh installation of High Availability
servers and how to configure the pair of CallPilot High Availability servers.
In this NTP, the administrator installs and configures the CallPilot server.
Copyright © 2007, Nortel Networks
.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
37