Nortel Meridian Meridian 1 Maintenance Manual page 261

Table 7
maint messages that appear on the console (continued)
Command Message
ccrusr ERROR: Insufficient memory for
profile data. Exiting user session.
ERROR: AMprofile cannot be read
properly. Exiting user session.
ERROR: A CCR application has
not been installed properly. Exiting
user session.
Fatal Error: No user id passed to
musess
Fatal Error: Cannot load language
files or user profile file. Exiting
user session.
chgpasswd You cannot change the password
for Ôlogin IDÕ
conshare conshare session unsuccessful
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 5: Application Module and IPE Module error messages 249
Ñ continued Ñ
Description
There is not enough available
memory for a CCR user session.
Log out any unnecessary user
sessions. Reboot the system.
The system profile cannot be read
or may be corrupted. The user
session will not execute correctly. It
is likely the software was not
installed properly.
The system profile may be
corrupted. The user session will not
execute correctly. It is likely the
software was not installed properly.
The logon to CCR was not correct.
Restart CCR and try again.
The language files and CCR data is
corrupted. Reload CCR and try
again.
You do not have permission to
change the password for the login ID
you entered.
The communications connection
between the Application Module or
IPE Module and the MeridianÊ1 SDI
port is not set up correctly. Refer to
the Meridian Link/Customer
Controlled Routing Installation and
Upgrade Guide (NTP 553-3202-
210).