Nortel Meridian Meridian 1 Maintenance Manual page 335

2008
Log message
Parameters
1: Bad message: missing or wrong information in the request
message
2: Meridian 1 link down: statistics changes required to complete
the removal cannot be requested
3: Time-out on requested statistics changes from Meridian 1
4: Unknown script: script is not installed
Description
to complete. The script is not removed or never was installed.
This indicates a software error. If the script can be reinstalled,
Impact
then there is no impact. If not, restart the software to clear the problem.
Recovery differs according to the cause, as follows:
Recovery
1: Software errorÑlog out and log back into the system, then retry
the removal.
2: The script removal requires changes in the statistics information
from Meridian 1. When the link is down, these changes cannot be
requested to complete the script removal. Try again later when the
link is up.
3: The script removal requires changes in the statistics information
from Meridian 1. No response to the requests was received from
Meridian 1. Check the status of the link and try again later.
4: This is an attempt to remove a script of which call processing
software is unaware. Since the script is not installed, there is no
need to remove it.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 7: CCR log file messages 323
Script removal failed
Cause 1, 2, 3, or 4 and Script Name
A script removal from the call processing software failed