Ccrstartñstart Up The Ccr Application; Ccrtrafficñmaintain Script Statistics - Nortel Meridian Meridian 1 Maintenance Manual

ccrstartÑstart up the CCR application
This command applies to CCR only.
This command allows you to start up the CCR application. It is not usually
necessary to use a ccrstart command explicitly, because an applstart
command will start all applications on an Application Module.
Example:
maint> ccrstart
10/13/93 09:37:13 Starting CCR Application...
Starting Customer Controlled Routing Processes...
maint>
ccrtrafficÑmaintain script statistics
This command applies to CCR only.
This command allows the maintenance person to monitor the script
statistics for the CCR application.
Example:
maint> ccrtraffic
CCR Traffic and Statistics Reporting Utility
1. Configure Traffic Report Options
2. Enable Traffic Reporting
3. Disable Traffic Reporting
4. View Report History
5. View Traffic Report Configuration
Enter the number of the function you want to perform
(Hit the <RETURN> key to EXIT)
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 37