Note: In the following examples, <cr> indicates where you press
[Return]. Also, use uppercase characters when typing the day (SUN,
MON, and so on).
Example 1: Scheduling a new backup
maint> backconfig
A backup has not been scheduled.
Do you want to schedule a backup [y,n]: y
Enter time in 24-hour form: 00:00Ñ23:59
Enter return for no change
Change scheduling time from Ô02:00Õ to: <cr>
No change to scheduling time.
Enter day in the form: SUN=Sunday, MON=Monday, ..., ALL=all
Enter a return for no change
Change scheduling day from ÔSUNÕ to: <cr>
No change to scheduling day.
Should tape backup be reoccurring? [y,n]: n
ATTENTION: Make sure a tape is in the drive prior to
scheduled backup time
maint>
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 25