Telephone Change Procedure - Nortel 1000 User Manual

Using Desktop Services
Figure 41: Example of a validation error message

Telephone change procedure

The following procedure outlines the steps that you take to make changes
to your telephone.
1. Launch a web browser, and then navigate to the OTM host name or
IP address provided by your network administrator.
2. Log in to Desktop Services using the login name and password
provided by your network administrator.
3. The My Profile
information (see Figure 2 on page 11).
4. Click a telephone extension link in the navigation tree.
The General
you can change the
Key Based Modules,
fields (see Figure 3 on page 14). To make a change:
a. Enter the new value, and then click Submit. A page containing a
summary of your changes opens (see Figure 4 on page 16).
b. Click Confirm.
c. A confirmation message is shown (see Figure 39 on page 45
through Figure 41 on page 46).
46
web page opens. This contains your OTM directory
page opens. If allowed by your network administrator,
Station Location,
Key Expansion
Display Based Modules,
Modules, and Designation