78 Chapter 2: Application Module commands
showidÑdisplay Meridian 1 information
553-3211-510 Standard 1.0 October 1998
The showid command indicates the ID and the package authorizations for
the Meridian 1 connected to the Application Module or IPE Module.
The following services may appear in the list:
1
Operations, Administration, and Maintenance software required for
any Application Module or IPE Module application
96
This service appears automatically if both Service 97 and Service 98
are present. It is not an orderable service, but is supplied auto-
matically for compatibility with earlier releases of host software.
97
Inbound Call Management service for the Meridian Link application
98
Outbound Call Management service for the Meridian Link
application
99
Service package for the CCR application
100
Host Enhanced Routing for the Meridian Link application
101
Host Enhanced Voice Processing for the Meridian Link application
Example:
maint> showid
SL-1 ID: LEAN01
Base Services: 1, 99
maint>