Nortel Meridian Meridian 1 Maintenance Manual page 325

1011
Log message
Parameters
Description
during start-up of the call processing software.
The application does not start up.
Impact
Use the version command to verify which CCR is installed.
Recovery
Verify that the information reported is correct. Reinstall the software.
1012
Log message
Meridian 1.
Parameters
have the following meanings
1: Queue read failure.
2: Application Registration API failure.
3: Application Registration rejected.
4: No response to the Application Registration.
5: The queue for communication with AM software is full.
6: Maximum outstanding requests detected by the API or AM
Base. No more allowed.
7: AM Base cannot be accessed. Request cannot be executed.
8: Meridian 1 not responding to Link Status or Package query
messageÑkeep trying.
9: Meridian 1 rejected the start-up message.
10: An AM software error occurred such that the request could
not be processed.
11: The requested device is not acquired.
12: The device is already locked by another application.
13: API/CCR detects response time out for request.
14: An unknown error was returned by the API software.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 7: CCR log file messages 313
The system profile file contains invalid data.
None
Data required from the system profile file was not found
Unable to establish communication path with the
Cause 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 14 which