Table 4
Link parameters (continued)
Link parameter
T12
T13
T14
T15
T16
Maximum T12
retries
Maximum T13
retries
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Allowed values
(defaults in parentheses)
0Ð(1800)Ð9999
0Ð(1800)Ð9999
0Ð(600)Ð9999
0Ð(1500)Ð9999
0Ð(1300)Ð9999
0Ð(3)Ð9999
0Ð(3)Ð9999
Ñ end Ñ
Chapter 3: Link maintenance commands 113
Description
Amount of time (in 1/10 second
increments) the AM or IPE Module will
wait for an X.25 reset confirmation
packet after sending an X.25 reset
request packet to the host
Amount of time (in 1/10 second
increments) the AM or IPE Module will
wait for an X.25 clear confirmation
packet after sending an X.25 clear
request packet to the host
Amount of time (in 1/10 second
increments) the AM or IPE Module will
wait for a packet with any P(R) value
after sending an X.25 data packet to the
host
Amount of time (in 1/10 second
increments) the AM or IPE Module will
wait for a packet with a P(R) value that
acknowledges a transmitted X.25 data
packet to the host
Amount of time (in 1/10 second
increments) the AM or IPE Module will
wait for an X.25 interrupt confirmation
packet after sending an X.25 interrupt
request packet to the host
Maximum number of times the AM or
IPE Module sends reset requests due to
T12 timeouts
Maximum number of times the AM or
IPE Module sends clear requests due to
T13 timeouts