Tape Drive; Disk Drive; I/O Connectors - Nortel Meridian Meridian 1 Maintenance Manual
Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide
Hide thumbs
Also See for Meridian Meridian 1:
- Feature description and administration (1816 pages) ,
- Scripting manual (812 pages) ,
- Upgrade manual (286 pages)
Table of Contents
Advertisement
Tape drive
The tape drive is a 600-Mbyte cassette tape drive. The tape drive cannot be
replaced in the field.
The following tapes are supplied with the IPE Module:
¥
a 155-Mbyte tape that provides the operating system for the IPE
Module
¥
a 155-Mbyte tape that provides the application software
Disk drive
The disk drive is a 240-Mbyte drive. The disk drive cannot be replaced in
the field.
I/O connectors
The I/O connectors for the IPE Module installed in an Option 11 system
are standard, shielded, 50-pin tip-ring-type connector ports on the
connector panel, which is located under the cabinet containing the module.
The I/O connectors for an IPE Module installed in an Options 21Ð81
system are also standard, shielded 50-pin connector ports, which are
located on the two I/O panels.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 1: Overview 13
- Quick Links:
- Logging in
Hide quick links:
Advertisement
Table of Contents
