Nortel Meridian Meridian 1 Maintenance Manual page 327

1013
Log message
Parameters
Description
Some traffic messages may be lost.
Impact
The system recovers automatically.
Recovery
1014
Log message
Parameters
Description
between the reporter and other processes.
The traffic reporting feature is disabled.
Impact
Use the applexit and commands to restart the application.
Recovery
1015
Log message
Parameters
Description
was unable to respond to polling messages from the Link Software in
the allotted time. When this happens, the Call Processor is trying to
reset itself by reinitializing itself.
Cannot process new calls while initializing.
Impact
Automatic recovery
Recovery
Application registration released ... restarting call processing
Misc.
software.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 7: CCR log file messages 315
The process restarted unexpectedly due to error.
Component, Object, and Function
The reporter process restarted because of an error.
Unable to establish inter-process communication path.
Component, Object, and Function
Inter-process communication could not be established
The process died due to inability to respond to polling.
Component, Object, and Function
The Call Processor has gone into an unknown state, and