Nortel Meridian Meridian 1 Maintenance Manual page 320

308 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
1003
Log message
File Name and Procedure where the error occurred
Parameters
User ID, [User Name], and Procedure where the error occurred
File Name, [Original Directory], and Procedure where the error occurred
[Script Name], [Script State], and Procedure where the error occurred.
The CCR system manager software could not allocate
Description
enough memory to continue its operation unimpaired.
System memory is in short supply. The specified resource
Impact
may not be created, or may not reset during start-up, at midnight, or
during shutdown. This can interrupt script operation if the Variable
Table or the Association Table is the affected resource. If the ACD
statistics file is the affected resource, this can interrupt call processing.
If the password file is the affected resource, this can prevent user
logins.
This event may also indicate that the specified resource is not validated
against the resource list or not moved to the correct directory during
start-up, at midnight, or during shutdown. This should not affect the
normal operation of the software.
Log out all user sessions except maint. Shut down and
Recovery
restart the system.
1004
Log message
None
Parameters
The user session software could not allocate enough
Description
memory to continue its operation unimpaired.
System memory is in short supply. This message indicates that
Impact
a user session could not continue or perform a task due to no memory.
If you have multiple user sessions, log some out. If this
Recovery
occurs during a high traffic period, wait until the traffic subsides. If
this fails, restart the application. Reboot the system if the problem
persists.
CCR system manager out of memory
User Session out of memory