414 Chapter 8: Recovery/replacement procedures
553-3211-510 Standard 1.0 October 1998
Procedure 20: Load the operating system tape on an IPE Module or an
Application Module with an MVME167 card (continued)
Figure 71
Additional prompts (IPE Module)
Update Non-Volatile RAM (Y/N)?
Reset Local System (CPU) (Y/N)?
5
At the Ò167-Diag>Ó prompt, type env and press [Return].
The environment prompts appear. Answer them as indicated in the
figure below. Then go to step 6.
If you make a mistake, quit the process by entering a period (.) at a
prompt and answering ÒnÓ for the last two questions (Update Non-
Volatile RAM/Reset Local System). This brings you back to the
Ò167-Diag>Ó prompt. Then type env;d and press [Return] to undo
the mistakes you made and bring back the original default values.
Note: At the ÒAuto Boot Controller LUN=00?Ó prompt, type a period
(.) and press [Return] to bypass additional prompts that do not need
to be changed.
y <cr>
y <cr>