Nortel Meridian Meridian 1 Maintenance Manual page 53

Example:
View Traffic Report Configuration
Script Statistics
Reporting Interval
Reporting Period
Reporting State
(Hit the <RETURN> key to EXIT)
The Current values are those that are currently being used by the reporting
facility. The New values are those that a maintenance user has edited but
not yet enabled. Unless the user enables the changes, they will be lost upon
exit. The user will be reminded of this when exiting and will be given a
chance to enable or exit.
Note: To obtain script statistics, you must enable traffic reporting and
include script statistics.
Script statistics output
If script statistics have been included in the traffic report configuration, the
script statistics report will be saved in a CCR log file.
The script statistics report provides information on the number of incoming
calls controlled by a script, and how those calls were handled by the script.
The breakdown of the types of call treatments include the following
statistics:
¥ QUEUE TOÑnumber of times a QUEUE TO command was executed
¥ ROUTE TOÑnumber of times a ROUTE TO command was executed
¥ RANÑnumber of times a RAN treatment was given
¥ MUSICÑnumber of times a MUSIC treatment was given
¥ IVRÑnumber of times an IVR treatment was given
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 41
Current
Excluded
60 minute(s)
14 day(s)
Enabled
New
Excluded
30 minute(s)
7 day(s)
Disabled