Nortel Meridian Meridian 1 Maintenance Manual page 147

Disable monitor
This command turns off message monitoring. It does not alter the list of
messages that were set for monitoring.
Command format:
mlusr> disable monitor association_id
Example:
To disable monitoring for messages set for association_id 1:
mlusr> disable monitor 1
Disable monitor successful
mlusr>
Clear message for monitoring
This command clears the specified message types from the list of messages
that are to be monitored.
Command format:
mlusr> clear monitor association_id message [message ...]
Example:
To clear monitoring of two messages, mlmakecall and mlanswer, for
association_id 1:
mlusr> clear monitor 1 0801 0809
or
mlusr> clear monitor 1 mlmakecall mlanswer
Clear monitor successful
mlusr>
To clear all messages, enter:
mlusr> clear monitor 1 all
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 135