Nortel Meridian Meridian 1 Maintenance Manual page 262

250 Chapter 5: Application Module and IPE Module error messages
Table 7
maint messages that appear on the console (continued)
Command Message
diskspace (no error messages)
diskuse Disk usage greater than 95%
exit/quit (no error messages)
filedelete Nothing selected: no action taken
No files to delete: no action taken
No files selected
No files available for selection
selectool: input file not found
selectool: out of memory
selectool: unknown error
<NUMBER>: exiting
553-3211-510 Standard 1.0 October 1998
Description
There is the possibility that the file
system could fill up. Remove any
unnecessary files using the
filedelete command.
You have pressed [Return] without
selecting a file.
No files are available to be deleted.
You have pressed [Return] without
selecting a file.
No files are available to be deleted.
The command which invoked the
selector is programmed incorrectly.
Report the failure to your Nortel
support personnel.
The selector cannot obtain enough
memory to function. Report the failure
to your Nortel support personnel.
A programmer error within the
selector causes an unknown error.
Report the failure to your Nortel
support personnel.
Note: <NUMBER> in the message
is replaced with the actual error
number generated.
Ñ continued Ñ