COMAND
COMAND system settings
COMAND system settings
Systems setting menu overview
Display
Time
Display design Time settings
Display design
Switching the display on or off
To switch off: select "Vehicle"
play off".
To switch back on: turn ymz, slide
qmr, slide
omp
or press n.
Setting day/night design
Select "Vehicle"
"System settings"
"Display".
Select "Day design" or "Night design" or
"Automatic".
i
In the "Automatic" setting, COMAND analy-
ses the automatic vehicle light sensor and
switches between the display designs automati-
cally.
196
Text reader
Lingua-
tronic*
Text reader
Linguatronic*
settings
settings
Time settings
Setting the time
i
"Dis-
The correct time must be set for the follow-
ing navigation system* functions to operate cor-
rectly:
Route guidance on routes with time-depend-
ent traffic guidance
Calculation of expected time of arrival
Select "Vehicle"
"Time"
"Time".
To select hour or minute(s): slide
omp.
To set the value: turn
qmr.
To store the setting: press n.
Language
Favourites
Language
Assign
settings
programmable
button
i
The increment value for setting the minutes
depends on the situation. It is 30 minutes if your
vehicle is equipped with a navigation system*
and GPS reception is available. It is one minute if
there is no GPS signal or if your vehicle is not
equipped with a navigation system*.
"System settings"
ymz
or slide
Services*
Reset
Bluetooth*
Reset
settings
COMAND
to factory
settings