Mercedes-Benz CL-Class 2006 Owner's Manual page 306

Press # again if you wish to change
the current status.
Switching on the reversing camera* au-
tomatically
i
The view from the reversing camera is
shown in the COMAND display.
Press ( or & to select the
"Assistance" menu.
Press % or $ to select the
"Rear-view camera" function.
Press #.
P54.32-3379-31
Press # again if you wish to change
the current status.
You switch between:
"Automatic in R gear": the reversing
camera switches on automatically
when reverse gear is engaged.
"Off": the reversing camera does
not switch on.
Service menu
In the "Service" menu, you can:
call up messages
check* or monitor the tyre pressure
call up ASSYST PLUS
check the engine oil level
Calling up messages
i
You will find a menu overview on
( page 275).
You can call up malfunctions which have
occurred. The display shown depends on
whether a malfunction has occurred or
not.
On-board computer
G
Risk of accident
The on-board computer only records and
displays malfunctions and warnings from
certain systems. For this reason, you should
always make sure that your vehicle is safe to
use. You could otherwise cause an accident
by driving an unsafe vehicle.
Press ( or & to select the
"Service" menu.
If malfunctions have occurred, the follow-
ing entry, for example, will appear in the
display: "2 messages".
Press % or $ to select the entry.
Press # to confirm.
You can scroll through the messages with
% or $. The possible malfunctions
are described in the "Practical advice" sec-
tion ( page 405).
i
If you turn the key to position 0 in the igni-
tion lock and then back to position 2, all the mes-
sages are deleted from the malfunction memory.
Controls
285