Mercedes-Benz CL-Class 2006 Owner's Manual page 174

i
With input characters 4, you can only se-
lect the characters that are currently available.
Which these are depends on the current input
string and the data contained on the digital map.
During the character selection procedure
described below, list entry 1 always
shows a junction that most closely match-
es the current input string. COMAND auto-
matically adds plausible characters 3 to
characters 2 already entered by the user.
To select a character: slide
turn ymz.
To confirm the character selection:
press n.
To delete individual characters: se-
lect ) in the bottom line and press n.
To delete an entire entry: select ) in
the bottom line and press and hold n
until the entire entry has been deleted.
To accept the first list entry: press
and hold n until the address input
menu appears.
COMAND has automatically accepted
the first list entry and entered it in the
address input menu.
To cancel character entry: select
"Back" in the bottom line and press n.
or
Press the L back button.
omp or
The input characters 4 disappear if
COMAND is able to uniquely assign the
characters entered to one junction. The list
of junctions is shown without the input
characters. Here you can make another se-
lection.
It is also possible to change to the junction
list without input characters manually at
any time during character input.
COMAND navigation system* (entering a destination)
or
Junction list without input characters
or
COMAND
To change manually to the junction
list without input characters: slide
qm.
Select ? in the second to bottom line
and press n.
P82.86-5331-31
To select a junction: slide qmr
turn ymz.
To cancel the selection: select "Back"
and press n.
Press the L back button.
or
153