Mercedes-Benz CL-Class 2006 Owner's Manual page 234

The "Mono" function is automatically
switched off if you:
change automatic air conditioning set-
tings for the front-passenger side with
COMAND
press a rocker switch for the automatic
air conditioning on the front-passenger
side
Adjusting the footwell temperature
i
This setting is effective in automatic mode,
especially at low outside temperatures.
You can use the "Footwell temperature"
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
The greater the value you set, the higher
the temperature in the footwell.
Air-conditioning function line
air-conditioning central menu.
To select "Footwell temperature":
slide qmr or turn ymz.
A scale appears.
P82.86-5692-31
To change the temperature differ-
ence: slide qmr
To confirm the selection: press n.
Setting the blower settings for the air
vents
i
This setting is effective in automatic mode,
especially at high outside temperatures.
This function allows you to determine the
Select
way the air is blown through the air vents
in automatic mode. The blower settings
chiefly determine the air distribution and
the airflow. You can select:
Focused (high blower setting)
Medium (standard setting)
Diffuse (low blower setting)
COMAND automatic air conditioning
If the vehicle has become very warm and
the automatic air conditioning is cooling
the interior, the blower settings are briefly
cancelled.
Air-conditioning function line
conditioning central menu
"Airflow".
A selection list appears.
The current setting is indicated by a
dot.
or turn ymz.
To change the blower settings: slide
qmr
To confirm the selection: press n.
COMAND
Air-
select
P82.86-5691-31
or turn ymz.
213