Mercedes-Benz CL-Class 2006 Owner's Manual page 95

COMAND
COMAND radio
Slide omp or turn ymz when the main
area is selected.
or
Select "Audio" "Audio"
"Radio" "Station list".
The station list appears. The R dot in
front of a list entry indicates the cur-
rently selected station. A number in
front of the list entry indicates the pre-
set position in the station preset mem-
ory.
Select the station.
Tuning in stations using manual tuning
i
Manual tuning is only available in the MW,
LW and SW wavebands.
Slide omp or turn ymz when the main
area is selected.
Station search scans up or down and
stops at the next station that the radio
can receive.
Tuning in stations using station presets
Select "Audio" "Audio"
"Presets".
or
74
Press n after selecting the main area.
The preset menu appears. The R dot
in front of a preset position indicates
that the currently selected station is
"Radio"
stored there.
Select the station preset and briefly
press n.
Tuning in stations by entering the
frequency manually
Select "Audio"
"Radio"
To increase or decrease the
number: slide
i
You can only tune in to currently permitted
numbers.
To select the next number: slide
omp.
To set the frequency: press n.
COMAND tunes in to the frequency en-
tered.
i
If you enter a frequency in the medium
waveband which is outside the frequency range,
"Radio"
COMAND tunes in to the next lowest frequency.
"Audio" "Radio"
"Frequency input".
qmr or turn ymz.
Storing stations
Twenty stations can be stored in each
waveband.
Storing stations manually
Select "Audio" "Audio"
"Radio" "Save station".
or
Press n after selecting the main area.
or
Select "Audio" "Audio"
"Presets".
All three of these will bring up a selec-
tion list. The R dot in front of a preset
position indicates that the currently se-
lected station is stored there.
"Radio"
"Radio"