Mercedes-Benz CL-Class 2006 Owner's Manual page 212

Select "Save".
COMAND stores the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
Otherwise, you will see a prompt ask-
ing whether one of the existing num-
bers should be overwritten.
Select "Yes" or "No".
After selecting "Yes", a selection list
appears with the four existing num-
bers.
Select the number to be overwritten.
COMAND overwrites the selected
number with the new data.
Adding to a telephone number data
field
i
Each address book entry may contain up to
four data fields for private telephone numbers
and four data fields for business telephone num-
bers.
This function is not possible for entries from the
phone book on the mobile phone.
Display the details about an entry and
highlight the telephone number data
field ( page 189).
Select "Options" "Add tel. no.".
Select a number category, e.g. "Home".
Select a telephone category, e.g.
"Landline telephone number".
Select "Save".
COMAND adds the data field to the entry if
there are fewer than four numbers as-
signed to the entry in the selected number
category. You can now enter a number into
the data field.
Proceed as of the step "To enter data
into a field" in the "Creating a new ad-
dress book entry" section
( page 186).
If four numbers are already stored for the
entry in the selected number category, a
prompt will appear asking whether one of
the data fields should be overwritten.
Select "Yes" or "No".
If you select "Yes", a selection list will
appear containing the four data fields.
Select the field to be overwritten.
COMAND deletes the number of the se-
lected field. You can now enter a new
number in the data field.
COMAND address book
Proceed as of the step "To enter data
into a field" in the "Creating a new ad-
dress book entry" section
( page 186).
Calling a number stored in an entry
i
To do this, COMAND must be equipped with
a telephone*. The mobile phone must be insert-
ed into the bracket.
Display the details about an entry and
highlight the telephone number data
field ( page 189).
Press n and select "Call".
The telephone* makes the call. The
COMAND display shows telephone
mode.
i
If COMAND is not equipped with the text
message function, the telephone* starts dialling
n
as soon as is pressed.
COMAND
191