Mercedes-Benz CL-Class 2006 Owner's Manual page 90

Adjusting the treble or bass
Select "Sound" "Treble" or "Bass".
The previously selected setting is indi-
cated by an empty bar.
P82.86-4840-31
Adjusting the treble and bass
1 Last setting made
2 Current setting
To change the setting: slide
turn ymz until the desired treble or
bass setting is reached.
To store the setting: press n.
The setting is stored and you exit the
menu.
To exit the menu without storing:
press the L back button or slide
omp.
Adjusting the balance or fade
The balance can be used to set whether
the sound is to be louder on the driver's
side or the front-passenger side.
With the fade you can set whether the
sound is louder at the front or rear of the
vehicle.
Select "Sound"
P82.86-4841-31
qmr or
Adjusting the balance and fade
1 Current setting
To change the setting: slide
slide omp until the desired balance/
fader setting is reached.
To store the setting: press n.
The setting is stored and you exit the
menu.
To exit the menu without storing:
Press the L back button.
Surround sound*
If your vehicle is equipped with the
harman/kardon LOGIC7
Sound system, you can select
"LOGIC7
"Balance/fader".
Harman/kardon LOGIC7
Sound is available for the following operat-
ing modes:
Audio DVD* (MLP, DTS, PCM and Dolby
Digital audio formats)
Video DVD (PCM, DTS and Dolby Digit-
al audio formats)
Audio CD
MP3
Radio
PCMCIA
Aux
qmr or
i
Because many DVDs contain both stereo
and multi-channel audio formats, it may be nec-
essary to set the audio format ( page 87) and
( page 94).
COMAND
COMAND introduction
Surround
®
® on" and "LOGIC7 ® off".
Surround
®
69