Mercedes-Benz CL-Class 2006 Owner's Manual page 255

Hide thumbs Also See for CL-Class 2006:
Table of Contents

Advertisement

Controls
Seats
seat heating is not switched off after 20 minutes
if the seat ventilation is switched on simultane-
ously.
Make sure the key is in position 2 in the
ignition lock.
To switch on: press button 1 repeat-
edly until the desired heating level is
set.
To switch off: press button 1 repeat-
edly until all the indicator lamps go out.
i
If the battery voltage is too low, the seat
heating may switch off.
Adjusting the front-passenger seat
from the driver's seat*
G
Risk of injury
When adjusting the front-passenger
seat while it is occupied, make sure the
front-passenger seat is positioned as far
away as possible from the front-passenger
airbag. The front passenger could otherwise
be seriously or fatally injured in the event of
an accident or sudden braking.
Make sure that nobody can become trapped
as you adjust the seat.
234
The front-passenger seat can be adjusted
with the key removed from the ignition lock
and a door open. For this reason, children
should never be left unsupervised in the ve-
hicle. They could be trapped by a seat ad-
justment movement.
You can adjust the front-passenger seat
with the seat switches on the driver's side.
P54.25-5123-31
1 To adjust the front-passenger seat
To switch on or off: press button 1.
The following functions for the front-pas-
senger seat are available if the indicator
lamp in button 1 is on:
seat adjustment
seat heating/ventilation
memory function
Easy-entry/exit feature
The easy-entry/exit feature allows you to
get into and out of the vehicle more easily.
The steering wheel swings upwards and
the driver's seat* moves back when you
switch off the ignition and open the driver's
door or remove the key from the ignition
lock.
i
The steering wheel only moves upwards if it
is not already at its uppermost position. The driv-
er's seat only moves backwards if it is not al-
ready in its rearmost position.
The steering wheel and the driver's seat*
are moved to the position previously set
when you insert the key into the ignition
lock if the driver's door is closed, depend-
ing on your settings.
i
If you pull away, the adjustment procedure
is interrupted.

Advertisement

Table of Contents
loading

Table of Contents