Mercedes-Benz CL-Class 2006 Owner's Manual page 501

Practical advice
Changing the bulbs
Fit bulb holder 1 into the guide in the
headlamp. Cable duct 2 must point
down and to the right.
Turn bulb holder 1 clockwise until it
engages and cable duct 2 is at the
bottom on the left.
Changing the cornering light bulbs
Switch off the lights.
Open the bonnet.
Remove the cover ( page 478).
480
P82.10-4418-31
1 Bulb holder
2 Cable duct
Turn bulb holder 1 anti-clockwise un-
til it disengages.
Remove bulb holder 1.
Remove the bulb from the socket.
Insert the new bulb into the socket and
press it down fully.
Fit bulb holder 1 into the guide in the
headlamp.
The lug on the bulb holder must point
up and to the left and cable duct 2
must point up and to the left on the left-
hand headlamp and down and to the
right on the right-hand headlamp.
Turn bulb holder 1 clockwise until it
engages.