Mercedes-Benz CL-Class 2006 Owner's Manual page 430

Display messages
Only select position
P when vehicle is
stationary
Vehicle not in
position P
Child seat in wrong position
See Owner's Manual
Next service X
in ... days
in ... km
Drive to workshop without changing
gear
Possible cause/consequence
You have attempted to move the trans-
mission selector lever to P even though
the vehicle is still moving.
You have opened the driver's door and
the transmission is in position R, N
or D.
The child seat is not positioned correct-
ly.
The sensor for the child seat recogni-
tion is faulty.
Service X must be carried out in ... days
or ... km.
The transmission position cannot be
changed due to a malfunction.
Practical advice
Display messages
Possible solution
Stop the vehicle.
Make sure that the transmission is in po-
sition P and the vehicle is secured with
the electric parking brake when leaving
the vehicle.
Move the child seat into the correct posi-
tion.
Have the sensor for the child seat recog-
nition checked at a qualified specialist
workshop.
Have the service displayed carried out at
a qualified specialist workshop.
If transmission position D is selected:
Drive to a qualified specialist workshop
without moving the transmission selector
lever from transmission position D.
If transmission position N, R or P is selected:
Consult a qualified specialist workshop.
409