Comand System Settings; Time; Time Settings - Mercedes-Benz CL Operator's Manual

COMAND system settings

System settings submenu overview
i The components and operating principles
of COMAND can be found on (
System settings can be made in the following
submenus:
Display Q Day Mode, Night Mode,
R
Automatic
Time Q Time, Date, Format, Time Zone
R
Text Reader Q Speed Q Fast,
R
Medium or Slow:
Adjusts the reading speed of the Voice
Control System.
Voice Control Q Help Window, Start
R
New Individualization, Delete
Individualization
Language: Selecting system language
R
Favorites Button *: Assigning the
R
favorite button
Bluetooth Q Search for Bluetooth
R
Devices, Bluetooth activated. For
information on the Bluetooth
see ( Y page 138).
Upload/Download Data Q Copy Data
R
to Storage Medium, Import Data from
Storage Medium (
Reset: Resetting the COMAND system to
R
factory settings
Display settings
Switching the display on or off
X
Switching off: Select Vehicle Q
Display OFF.
X
Switching back on: Rotate
or press W.
ZVÆ, XVY
or
X
Press button u.
Y page 68).
®
interface
Y page 82)
or slide
cVd
COMAND system settings
Setting the display design
X
Select Vehicle Q System Q Display.
X
Select Day Mode, Night Mode or
Automatic.
In the Automatic setting, COMAND sets
i
the display design automatically. The
setting depends on the information
retrieved from the vehicle's light sensor.

Time settings

The time of day is set automatically according
to the GPS signal and the selected time zone.
All time information always applies to the
local time at the current vehicle position.
Time information changes when entering a
different time zone.
The correct time zone, daylight savings
i
time/standard time and the time itself
must be set for the following navigation
system functions to operate correctly:
Route guidance on routes with time-
R
dependent traffic guidance
Calculation of estimated arrival time
R
The settings are adopted for the analog
clock in the dashboard.
79
Z