Make sure the "Lower mirror when re-
versing" function is switched on in the
"Exterior – mirror convenience settings"
submenu in COMAND.
Engage reverse gear.
i
When you engage reverse gear, the most re-
cently selected exterior mirror is selected auto-
matically.
Press button 1 repeatedly until the ex-
terior mirror on the front-passenger
side is selected.
The exterior mirror on the front-pas-
senger side swings to the stored park-
ing position.
The exterior mirror on the front-passenger
side swings back to its original position:
as soon as you exceed a speed of
10 km/h
about ten seconds after reverse gear is
deselected
if you press button 1 for the exterior
mirror on the driver's side
i
If you adjust the exterior mirror while it is
in the parking position, this new position will be
stored as the new parking position.
Controls
Mirrors
241