Mercedes-Benz CL-Class 2006 Owner's Manual page 136

To switch back to the call display:
select "Y Back".
Ending an active call
To end a call: select "Tel"
"Telephone" "4 END".
or
Press the t button on the tele-
phone keypad or the multi-function
steering wheel.
The COMAND display switches to the
last display selected if necessary.
Rejecting or accepting a waiting call
i
The "Call waiting" function is only available
if it is supported by the telephone provider and if
it is enabled.
If you are having a single conversation and
receive another call, the call waiting dis-
play will appear. You will also hear a ringing
tone.
To reject: select "Reject".
or
Press the t button on the tele-
phone keypad or the multi-function
steering wheel.
To accept: select "Accept".
"Tel"
or
Press the s button on the tele-
phone keypad or the multi-function
steering wheel.
If you accept the waiting call using the
COMAND controller, the telephone key-
pad, the multi-function steering wheel,
Linguatronic* or the Bluetooth headset,
the current call will be ended.
If you accept the waiting call using the mo-
bile phone, the current call will be put on
hold. You will then have two calls, with the
accepted call as the active call.
Two calls
Connecting a second call actively
i
The "Call waiting" function is only available
if it is supported by the telephone provider and if
it is enabled.
COMAND telephone*
In addition to accepting a waiting call, you
can also connect a second call actively.
You can only operate this function using
the mobile phone ( mobile phone operat-
ing instructions).
P68.20-5069-31
Illustration: telephone mode with a two
active calls
1 Call on hold
2 Active call
3 To end all calls
Switching between two calls (toggling)
You can only operate this function using
the mobile phone ( mobile phone operat-
ing instructions).
COMAND
115