Renault Laguna III Manual page 3299

B-pillar lining: General description
B91 or K91
Note:
The information contained in the following
describes the general repair procedure for all vehi-
cles having the same design for this part.
Before reading the following general information,
make sure that there are no special notes associ-
ated with the vehicle. These special notes are spec-
ified if necessary in other parts of the sub-section
dealing with the component.
Note:
For a detailed description of a particular connec-
tion, see MR 400.
DESIGN OF THE STRUCTURAL COMPONENT
The special feature of this part it that it concurrently
serves two functions:
- A-pillar lining (1) .
- B-pillar upper lining (2) ,
These two components can be partially replaced.
WARNING
If the mating faces of the parts to be welded are not
accessible, make EGW plug welds to replace the
original resistance welds (see MR 400).
SIDE UPPER STRUCTURE
122761
43A-13
43A