Renault Laguna III Manual page 3259

FRONT UPPER STRUCTURE
B91 or K91
ADJUSTMENT VALUES
a For all information regarding wing adjustment val-
ues, (see Vehicle panel gaps: Adjustment value)
(01C, Vehicle bodywork specifications).
ADJUSTMENT
a There are three possible front wing adjustments:
- Adjustment with the front door
- Adjustment with the bonnet
- Adjustment with the headlight and bumper
a For information on panel gap values (see Vehicle
panel gaps: Adjustment value) (01C, Vehicle
bodywork specifications).
a Observe the adjustment sequence (1) , (2) , (3) and
(4)
Front wing: Adjustment
122456
a Symbols A, B, C and D show the adjustment op-
tions.
The black dot in the centre represents the body of
the bolt.
The grey section represents the component to be
adjusted.
The white section represents the adjustment area.
I - PREPARATION FOR THE ADJUSTMENT.
a Remove:
- the front wheel arch liner (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection).
II - ADJUSTMENT WITH THE BONNET AND THE
FRONT HEADLIGHT
a
Note:
The adjustment with the bonnet and the front
headlight is done with the nuts on the front wing
upper attachment mounting with the front wing
removed.
a Remove:
- the headlight (see Headlight: Removal - Refit-
ting) (80B, Headlights),
42A-7
42A
109496