Renault Laguna III Manual page 3238

Rear floor, rear section: General description
Note:
The information contained in the following
describes the general repair procedure for all vehi-
cles having the same design for this part.
Before reading the following general information,
make sure that there are no special notes associ-
ated with the vehicle. These special notes are spec-
ified if necessary in other parts of the sub-section
dealing with the component.
Note:
For a detailed description of a particular connec-
tion, see MR 400.
I - DESIGN OF THE STRUCTURAL COMPONENT
The distinctive feature of this part is that it combines
the functions of the rear section of the rear floor and in-
tegrates the emergency spare wheel.
REAR LOWER STRUCTURE
123065
II - AREA TO BE CUT FOR PARTIAL
REPLACEMENT
Cut 1:
This line marks the area in which it is possible to make
a partial replacement.
III - ASSEMBLY INSTRUCTIONS FOR A PARTIAL
REPLACEMENT
Only the connections which are specific to the partial
replacement by cutting are indicated.
WARNING
If the mating faces of the parts to be welded are not
accessible, make EGW plug welds to replace the
original resistance welds (see MR 400).
If there are other issues regarding access to mating
faces, the various replacement options are described
in the basic instructions for structural bodywork repair
(see MR 400).
41D-1
41D
123066