Renault Laguna III Manual page 3176

FRONT LOWER STRUCTURE
Front impact cross member: General description
Note:
The information contained in the following
describes the general repair procedure for all vehi-
cles having the same design for this part.
Before reading the following general information,
make sure that there are no special notes associ-
ated with the vehicle. These special notes are spec-
ified if necessary in other parts of the sub-section
dealing with the component.
Note:
For a detailed description of a particular connec-
tion, see MR 400.
DESIGN OF THE STRUCTURAL COMPONENT
The special features of this type of part is that it is bolt-
ed onto the front side member ends, it does not have
any impact absorber units, and it is made of aluminium.
124605
41A-2
41A